Concept Guide

cellular profile
cellular profile <profile_name>
dialer <group>
driver acm|hso|option|sierra|ptumlusbnet
import <address>
modeswitch {eject <params>}|rezero
no
priority <1-255>
serial <sernum>
tty <ttyport>
user <login> password <password>
vendor <vend_id> product <prod_id>
Description
Create new profiles to support new USB modems or to customize USB characteristics.
Syntax
Parameter Description
cellular profile <profile_name>
Enter the keywords cellular profile followed by
your profile name. This command changes the
configuration mode and the command line prompt
changes to:
host (config-cellular <profile_name>)#
dialer <group>
Enter the keyword dialer followed by a group name
to specify the dialing parameters for the carrier.
The parameters tend to be common between
service providers on the same type of network
(CDMA vs. GSM) as displayed in the show dialer
group command.
driver acm|hso|option|sierra|ptumlusbnet
Enter the keyword driver followed by one of the
driver options:
l acm: Linux ACM driver.
l hso: Option High Speed driver.
l option: Option USB data card driver (default).
l sierra: Sierra Wireless driver.
l ptumlusbnet: Pantech UML290 driver.
import <address>
Enter the keyword import followed by the USB
device address as displayed in the show usb
command. Import retrieves the vendor/product
serial numbers from the USB device list and
populates them into the profile.
modeswitch {eject <params>}|rezero
Enter the keyword modeswitch followed by either:
l eject followed by the CDROM device.
l rezero: Send SCSI CDROM rezero command.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide cellular profile | 261