Concept Guide

crypto-local isakmp disable-aggressive-mode

Description

The command disables the IKEv1 aggressive mode.

Syntax

No parameters.

Usage Guidelines

The master-local communication by default uses IPsec aggressive mode when a PSK is used for authentication

between controllers. You need to convert master-local communication to certificate-based IPsec

authentication before disabling aggressive mode.

Disabling Aggressive Mode will impact other sessions which use aggressive mode such as Master-local IKE

session with PSK.

Example

crypto-local isakmp disable-aggressive-mode

Command History

This command was introduced in ArubaOS 6.3.

Command Information

Platforms Licensing Command Mode

All platforms Base operating system Config mode on master controllers

Dell Networking W-Series ArubaOS 6.5.x | Reference Guide crypto-local isakmp disable-aggressive-mode | 324