Concept Guide

crypto map global-map
crypto map global-map <map-number> ipsec-isakmp {dynamic <dynamic-map-name>}|{ipsec <ipsec-
map-name>}
Description
This command configures the default global map.
Syntax
Parameter Description
<map-number>
dynamic
Use a dynamic map.
<dynamic-map-name>}
Name of the dynamic map.
ipsec
Use a IPsec map.
<ipsec-map-name>
Name of an IPsec map.
Usage Guidelines
This command identifies the dynamic or ipsec map used as the default global map. If you have not yet defined
a dynamic or ipsec map, issue the command crypto map global-map or crypto-local ipsec-map to define
map parameters.
Example
The following command configures the global map with the dynamic map named dynamic_map_2.
(host)(config) #crypto map global-map 2 ipsec-isakmp dynamic dynamic_map_2
Command History
This command was introduced in ArubaOS 3.0
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide crypto map global-map | 339