Concept Guide

dynamic-ip
dynamic-ip restart
Description
This command restarts the PPPoE or DHCP process.
Syntax
No parameters.
Usage Guidelines
This command can be used to renegotiate DHCP or PPPoE parameters. This can cause new addresses to be
assigned on a VLAN where the DHCP or PPPoE client is configured.
Command History
This command was introduced in ArubaOS 3.0
Command Information
Platform
License Command Mode
Available on all platforms Available in the base operating
system
Enable mode on master controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide dynamic-ip | 354