Concept Guide

aaa authentication-server internal
aaa authentication-server internal use-local-switch
Description
This command specifies that the internal database on a local controller be used for authenticating clients.
Usage Guidelines
By default, the internal database in the master controller is used for authentication. This command directs
authentication to the internal database on the local controller where you run the command.
Command History
This command was available in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master or local
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide aaa authentication-server internal | 38