Concept Guide

guest-access-email
guest-access-email
smtp-port
smtp-server
no...
Description
This command configures the SMTP server which is used to send guest email. Guest email is generated when a
guest user account is created or when the Guest Provisioning user sends guest user account email a later time.
Syntax
Parameter Description Range Default
smtp-port
Identifies the SMTP port through which the guest-
access email is sent.
— —
<Port number>
The SMTP port number. 1–65535 25
smtp-server
The SMTP server to which the controller sends the
guest-access email.
— —
<IP-Address>
The SMTP server’s IP address. — —
no
Deletes the command configuration — —
Usage Guidelines
As part of the guest provisioning feature, the guest-access-email command allows you to set up the SMTP
port and server that process guest provisioning email. This email process sends email to either the guest or the
sponsor whenever a guest user account is created or when the Guest Provisioning user manually sends email
from the Guest Provisioning page.
Example
The following command creates a guest-access email profile and sends guest user email through SMTP server
IP address 1.1.1.1 on port 25.
(host) (config) #guest-access-email
(host) (Guest-access Email Profile) #
(host) (Guest-access Email Profile) #smtp-port 25
(host) (Guest-access Email Profile) #smtp-server 1.1.1.1
Related Commands
(host) #show guest-access-email
(host) #local-userdb-guest add
(host) #local-userdb-guest modify
(host) #show local-userdb-guest
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide guest-access-email | 390