Concept Guide

408| ids dos-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
detect-chopchop-attack
Enable/disable detection of
ChopChop attack.
true
false
false
detect-client-flood
Enable/disable detection of
client flood attack.
true
false
disable
detect-cts-rate-anomaly
Enable/disable detection of
CTS rate anomaly.
true
false
disable
detect-disconnect-station
In a station disconnection
attack, an attacker spoofs
the MAC address of either an
active client or an active AP.
The attacker then sends
deauthenticate frames to the
target device, causing it to
lose its active association.
Use this command to enable
the detection of disconnect
station attack.
true
false
enable
detect-eap-rate-anomaly
Enables Extensible
Authentication Protocol (EAP)
handshake analysis to detect
an abnormal number of
authentication procedures
on a channel and generate
an alarm when this condition
is detected.
true
false
false
detect-fata-jack-attack
Enable/disable detection of
FATA-Jack attack
true
false
enable
detect-ht-40mhz-intolerance
Enables or disables detection
of 802.11n 40 MHz
intolerance setting, which
controls whether stations
and APs advertising 40 MHz
intolerance will be reported.
true
false
false
detect-invalid-address
Enable/disable detection of
invalid address combinations
true
false
false
detect-malformed-association-
request
Enable/disable detection of
malformed association
requests.
true
false
disable
detect-malformed-auth-frame
Enable/disable detection of
malformed authentication
frames
true
false
disable