Concept Guide

aaa authentication-server radius
aaa authentication-server radius <rad_server_name>
acctport <port>
authport <port>
called-station-id type
{ap-group | ap-macaddr |ap-name | ipaddr | macaddr | vlan-id}
[delimiter {colon | dash | none}] [include-ssid {enable |disable}]
clone <server>
cppm username <username> password <password>
enable
enable-ipv6
enable-radsec
host <ipaddr>|<FQDN>
key <psk>
mac-delimiter [colon|dash | none | oui-nic]
mac-lowercase
nas-identifier <string>
nas-ip <ipaddr>
nas-ip6 <ipv6-adrress>
no
radsec-client-cert-name <name>
radsec-port <radsec-port>
radsec-trusted-cacert-name <radsec-trusted-ca>
radsec-trusted-servercert-name <name>
retransmit <number>
service-type-framed-user
source-interface vlan <vlan> ip6addr <ipv6addr>
timeout <seconds>
use-ip-for-calling-station
use-md5
Description
This command configures a RADIUS server.
Starting with ArubaOS 6.4, a maximum of 128 RADIUS servers can be configured on the controller.
Syntax
Parameter Description Range Default
<rad_server_name>
Name that identifies the server. — —
acctport <port>
Accounting port on the server. 1-65535 1813
authport <port>
Authentication port on the server 1-65535 1812
called-station-id type
{ap-group | ap-macaddr |ap-name
|
ipaddr | macaddr | vlan-id}
Configure this parameter to be
sent with the RADIUS attribute
Called Station ID for
authentication and accounting
requests.
— macaddr
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide aaa authentication-server radius | 42