Concept Guide

Parameter Description Range
Defaul
t
To clear the well known MACs in the
system, use the following commands:
l clear wms wired-mac:This clears all
of the learned wired MAC information
on the controller.
l reload: This reboots the controller.
cfg-valid-11a-channel
List of valid 802.11a channels that third-
party APs are allowed to use.
34-
165
N/A
cfg-valid-11g-channel
List of valid 802.11b/g channels that third-
party APs are allowed to use.
1-14 N/A
classification
Enable/disable rogue AP classification. A
rogue AP is one that is unauthorized and
plugged into the wired side of the
network. Any other AP seen in the RF
environment that is not part of the valid
enterprise network is considered to be
interfering — it has the potential to cause
RF interference but it is not connected to
the wired network and thus does not
represent a direct threat.
— true
clone
Name of an existing IDS rate thresholds
profile from which parameter values are
copied.
— —
detect-adhoc-network
Enable detection of adhoc networks. — false
detect-adhoc-using-valid-
ssid
Enable/disable detection of adhoc
networks using valid/protected SSIDs
— enable
detect-bad-wep
Enables detection of WEP initialization
vectors that are known to be weak and/or
repeating. A primary means of cracking
WEP keys is to capture 802.11 frames
over an extended period of time and
search for implementations that are still
used by many legacy devices.
— false
detect-ht-greenfield
Enables or disables detection of high-
throughput devices advertising greenfield
preamble capability.
— false
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide ids unauthorized-device-profile | 435