Concept Guide

Parameter Description Range
Defaul
t
suspect-rogue-conf-level
Confidence level of suspected Rogue AP
to trigger containment.
When an AP is classified as a suspected
rogue AP, it is assigned a 50% confidence
level. If multiple APs trigger the same
events that classify the AP as a suspected
rogue, the confidence level increases by
5% up to 95%.
In combination with suspected rogue
containment, this option configures the
threshold by which containment should
occur. Suspected rogue containment
occurs only when the configured
confidence level is met.
50-
100%
60%
suspect-rogue-containment
Suspected rogue APs are treated as
interfering APs, thereby the controller
attempts to reclassify them as rogue APs.
Suspected rogue APs are not
automatically contained. In combination
with the configured confidence level (see
suspect-rogue-conf-level), this option
contains the suspected rogue APs.
— false
unencrypted-valid-client-
quiet-time
Time to wait, in seconds, after detecting
an unencrypted valid client after which
the check can be resumed.
60-
36000
0
secon
ds
900
secon
ds
valid-and-protected-ssid
List of valid and protected SSIDs. — —
valid-oui
List of valid MAC OUIs. — —
valid-wired-mac
List of MAC addresses of wired devices in
the network, typically gateways or
servers.
— —
wireless-bridge-quiet-time
Time, in seconds, that must elapse after a
wireless bridge alarm has been triggered
before another identical alarm may be
triggered.
60-
36000
0
secon
ds
900
secon
ds
wireless-hosted-network-quiet-
time
The wireless hosted network detection
feature sends a log message and trap
when a wireless hosted network is
detected. The quiet time defined by this
parameter sets the amount of time, in
seconds, that must elapse after a
wireless hosted network log message or
trap has been triggered before an
identical log message or trap can be sent
again.
60-
36000
0
secon
ds
900
secon
ds
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide ids unauthorized-device-profile | 439