Concept Guide

Parameter Description Range Default
mac-delimiter
[colon|dash | none | oui-nic]
Send MAC address with user-
defined delimiter.
— none
mac-lowercase
Send MACaddresses as
lowercase.
— —
nas-identifier <string>
Network Access Server (NAS)
identifier to use in RADIUS
packets.
— —
nas-ip <ip-addr>
The NAS IP address to be sent in
RADIUS packets from that server.
If you define a local NAS IP setting
using this command and also
define a global NAS IP using the
command ip radius nas-ip <ip-
addr>, the global NAS IP address
takes precedence.
— —
nas-ip6 <ipv6-address>
NAS IPv6 address to send in
RADIUS packets.
You can configure a “global” NAS
IPv6 address that the controller
uses for communications with all
RADIUS servers. If you do not
configure a server-specific NAS
IPv6, the global NAS IPv6 is used.
To set the global NAS IPv6, enter
the ipv6 radius nas-ip6 <ipv6-
address> command.
no
Negates any configured
parameter.
— —
radsec-client-cert
<radsec-client-cert>
Configures a RadSec client
certificate on the RADIUSserver
to identify and authenticate
clients.
— —
radsec-port <radsec-port>
Designates a RadSec port for
RADIUSdata transport.
1-65535 2083
radsec-trusted-cacert-name
<radsec-trusted-ca>
Designates a Certificate Authority
to sign RadSec certificates.
— —
radsec-trusted-servercert-name
<radsec-trusted-ca>
Designates a trusted RadSec server
certificate.
— —
retransmit <number>
Maximum number of retries sent
to the server by the controller
before the server is marked as
down.
0-3 3
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide aaa authentication-server radius | 44