Concept Guide

aaa authentication stateful-dot1x
aaa authentication stateful-dot1x
default-role <role>
enable
no ...
server-group <group>
timeout <seconds>
Description
This command configures 802.1X authentication for clients on non-Dell APs.
Syntax
Parameter Description Range Default
default-role <role>
Role assigned to the 802.1X user upon login.
NOTE: The PEFNG license must be installed.
— guest
enable
Enables 802.1X authentication for clients on
non-Dell APs. Use no enable to disable
stateful 8021.X authentication.
— enabled
no
Negates any configured parameter. — —
server-group <group>
Name of the group of RADIUS servers used to
authenticate the 802.1X users. See aaa
server-group on page 107.
— —
timeout <seconds>
Timeout period, in seconds. 1-20 10 seconds
Usage Guidelines
This command configures 802.1X authentication for clients on non-Dell APs. The controller maintains user
session state information for these clients.
Example
The following command assigns the employee user role to clients who successfully authenticate with the server
group corp-rad:
aaa authentication stateful-dot1x
default-role employee
server-group corp-rad
Command History
This command was introduced in ArubaOS 3.0.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide aaa authentication stateful-dot1x | 50