Concept Guide

Command History
Version Description
ArubaOS 3.3 Command introduced
ArubaOS 6.1 The ipv6 firewall enable command was deprecated. Use the command ipv6
enable to enable/disable ipv6 packet/firewall processing on the controller.
ArubaOS 6.3 The session-mirror-destination parameter has been deprecated.
ArubaOS 6.4.1 The valid range for the following parameters was changed to <1-16384>:
l ping
l session
l tcp-syn
Command Information
Platform License Command Mode
Available on all platforms Available in the base operating system,
except for noted parameters
Config mode on master
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide ipv6 firewall | 550