Concept Guide

lacp system-priority
lacp system-priority <priority_value>
Description
Configure the LACP system priority.
Syntax
Parameter Description
<priority_value>
Enter the system priority value. The higher the value number the lower the
priority.
Range: 1 to 65535
Default: 32768
Usage Guidelines
Set the LACP system priority.
Related Commands
Command Description
lacp group Enable LACP and configure on the interface
show lacp View the LACP configuration status
show lacp sys-id View the LACP system ID information
show interface port-channel View information on a specified port channel interface
Command History
Release Modification
ArubaOS 3.4.1 Command introduced
Command Information
Platforms Licensing Command Mode
All Platforms Base operating system Configuration Mode (config) for Master
and Local controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide lacp system-priority | 562