Concept Guide

local-userdb-ap del
local-userdb-ap del mac-address <mac-addr> [all]
Description
This command deletes a Remote AP entry from the obsolete Remote AP database.
Syntax
Parameter Description
mac-address <mac-addr>
MAC address of the remote AP to be removed from the Remote AP database.
all
Remove all entries from the whitelist.
Usage Guidelines
When you upgrade from ArubaOS 5.0-6.1 to ArubaOS 6.2 or later, the remote AP whitelist table will
automatically move from the legacy remote AP whitelist to the newer remote AP whitelist. Issue the local-
userdb-ap del command to delete any AP entries that did not properly move to the new table during the
upgrade procedure. Entries in the newer remote AP whitelist can be removed using the command whitelist-db
rap del.
Example
The example below deletes a Remote AP from the obsolete Remote AP whitelist.
(host)(config) #local-userdb-ap del mac-addr 00:0b:86:c3:58:38
Related CommandsRelated Commands
Command Description
lacp group Enable LACP and configure on the interface
show lacp View the LACP configuration status
show lacp sys-id View the LACP system ID information
show interface port-channel View information on a specified port channel interface
Command
Description
show local-userdb-ap
Display the obsolete Remote AP whitelist.
whitelist-db rap del
Delete a remote AP from the current remote AP whitelist table.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide local-userdb-ap del | 577