Concept Guide

pan profile
pan profile <profile-name>
clone
firewall host <host> port <port> username <username> passwd <password>
no
Description
This command configures a Palo Alto Networks (PAN) profile to allow a controller to communicate with a
PANfirewall.
Syntax
Parameter Description
clone
Name of an existing PAN profile configuration from which parameter values
are copied.
firewall
Configures the information for the associated PAN firewall.
host <host>
IP address or hostname of the PANfirewall.
port <port>
Port number of the PAN firewall.
username <username>
The username of the PAN firewall.
passwd <password>
The password of the PAN firewall.
no
Negates any configured parameter.
Usage Guidelines
This command is used to configure the PANfirewall that the controller will be communicating with. The
username and password must match the name of the admin account configured on the PANfirewall.
(host) (config) #pan profile default
(host) (Palo Alto Networks Servers Profile "default") #firewall host 192.0.2.1 port 5642
username axde passwd ZAQ!2wsx
Command History
Modification
ArubaOS 6.4 Command introduced.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide pan profile | 652