Concept Guide

pkt-trace-global
pkt-trace-global {enable|disable} [trace-mask <tmask>]
Description
Enable global packet tracing in the datapath. Use this feature only under the supervision of Dell technical
support.
Syntax
Parameter Description
<acl-name>
Enable packet tracing for the specified access-control list.
enable
Enable global packet tracing for the ACL.
disable
Disable global packet tracing for the ACL.
tracemask <tmask>
Specify a trace mask. Use this feature only under the supervision of Dell
technical support.
Example
The following command enables the global packet tracing for all traffic.
(host) (config) #pkt-trace-global enable
Command History
This command was introduced in ArubaOS 3.4.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable mode on master controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide pkt-trace-global | 669