Concept Guide

rf ht-radio-profile
rf ht-radio-profile <profile>
40MHz-intolerance
clone <profile>
diversity-spreading-workaround
honor-40MHz-intolerance
no
Description
This command configures high-throughput AP radio settings. High-throughput features use the IEEE 802.11n
standard.
Syntax
Parameter Description Range Default
<profile>
Name of this instance of the profile.
The name must be 1-63 characters.
Default Options:
l “Default-a” is generally used in
association with high-throughput
devices running on the 5 GHz
frequency band, see rf dot11a-
radio-profile on page 733.
l “Default-g” is generally used in
association with high-throughput
devices running on the 2.4 GHz
frequency band, see rf dot11g-
radio-profile on page 744.
l “Default” is generally used when
the same ht-radio-profile is
desired for use with both
frequency bands.
— default-
a
default-
g
default
40MHz-
intolerance
Controls whether or not APs using this
radio profile will advertise intolerance
of 40 MHz operation. By default, 40
MHz operation is allowed.
— disabled
clone
Name of an existing high-throughput
radio profile from which parameter
values are copied.
— —
honor-40MHz-
intolerance
When enabled, the radio will stop
using the 40 MHz channels if the 40
MHz intolerance indication is received
from another AP or station.
— enabled
no
Negates any configured parameter. — —
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide rf ht-radio-profile | 761