Concept Guide

rf optimization-profile
rf optimization-profile <profile-name>
clone <profile>
handoff-assist
low-rssi-threshold <number>
no ...
rssi-check-frequency <number>
rssi-falloff-wait-time <number>
Description
This command configures the RF optimization profile.
Syntax
Parameter Description Range Default
<profile-name>
Name of this instance of the profile.
The name must be 1-63 characters.
— “default”
clone
Name of an existing optimization
profile from which parameter values
are copied.
— —
handoff-assist
Allows the controller to force a client
off an AP when the RSSI drops below
a defined minimum threshold.
— disabled
low-rssi-threshold
Minimum RSSI, above which deauth
should never be sent.
1-255 10
no
Negates any configured parameter. — —
rssi-check-frequency
Interval, in seconds, to sample RSSI. 9-255 3
seconds
rssi-falloff-wait-time <number>
Number of times the detected client
RSSI level must fall below the
minimum RSSI threshold the before
the AP sends a deauthorization
message to the client. The maximum
value is 8 times.
0-8 4
Example
The following command configures an RF optimization profile:
(host) (config) #rf optimization-profile Angela1
(host) (RF Optimization Profile "Angela1") #rssi-falloff-wait-time 3
(host) (RF Optimization Profile "Angela1") #rssi-check-frequency 2
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide rf optimization-profile | 764