Manualshelf

Concept Guide

ManualsBrandsDell ManualsAccess PlatformsW-Series 304/305 Access Points
861862863864865866867868869870
869| show aaa state configuration Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Ping/SYN/Session attacks = 0/0/0
The output of the show aaa state configuration command includes the following parameters:
Parameter Description
Switch IP IP address of the local controller.
Master IP IP address of the master controller.
Switch Role Role assigned to the controller on which you issued the show aaa
state command.
Current/Max/Total IPv4 Users Current number of IPv4 users on the controller/Maximum number of
IPv4 users that can be assigned to the controller at any time/Total
number of IPv4 users that have been assigned to the controller
since the last controller reboot.
Current/Max/Total IPv6 Users Current number of IPv6 users on the controller/Maximum number of
IPv6 users that can be assigned to the controller at any time/Total
number of IPv6 users that have been assigned to the controller since
the last controller reboot.
Current/Max/Total Users Current number of users on the controller/Maximum number of
users that can be assigned to the controller at any time/Total
number of users that have been assigned to the controller since the
last controller reboot.
Current/Max/Total Stations Current number of stations registered with the controller/Maximum
number of stations that can be registered with the controller at any
time/Total number of stations that have registered the controller
since the last controller reboot.
Captive Portal Users Number of current users authenticated via captive portal.
802.1X Users Number of current users authenticated via 802.1X authentication.
VPN Users Number of current users authenticated via VPN authentication.
MAC Users Number of current users authenticated via MAC authentication.
Stateful 802.1X Users Number of current users authenticated via stateful 802.1X
authentication.
Tunneled users Number of stations in tunneled forwarding mode, where 802.11
frames are tunneled to the controller using generic routing
encapsulation (GRE).
Configured user roles Number of configured user roles.
Configured session ACL Number of configured session ACLs.