Concept Guide
871| show aaa state configuration Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
fast age This parameter shows if fast aging of user table entries has been
enabled or disabled. When this feature is enabled, if a device comes
up on the network with a different IP address, the device's old IP
address is immediately deleted. If the user fast-age feature is not
configured, the controller retains up to two IPv4 and two IPv6
addresses per device , and these IPs are aged out only when the
device becomes inactive.
Per-User Log
Shows if a controllercollects per-user log files for debugging.
NOTE: This option is enabled using the aaa log command.
Bandwidth contracts Number of configured bandwidth contracts on the controller.
IP takeovers Number of times a two different stations have attempted to use the
same IP address (IP spoofing).
Ping/SYN/Session attacks Number of reported ping, SYN and session attacks.
Command History
Release Modification
ArubaOS 3.0 Command introduced.
ArubaOS 6.3 The per-user log field was added to the output of this command
This command was introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master or
local controllers