Concept Guide

891| show acl acl-table Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
software from other vendors. This ACL permits or denies traffic based
on the source address of the packet.
ACE Index Starting index entry for the ACL’s access control entries
ACE count Number of access control entries in the ACL
Name Name of the access control list
Applied Number of times the ACL was applied to a role.
Total free ACE entries The total number of free ACE entries. This includes available ACE entries at
the bottom of the list, as well as free ACE entries in the middle of the table
from previous access list entries that were later removed.
Free ACE entries at the
bottom
The total number of free ACE entries at the bottom of the list.
Next ACE entry to use Ace number of the first free entry at the bottom of the list.
ACE entries reused For internal use only.
ACL count Total number of defined ACLs
Tunnel ACL Total number of defined tunnel ACLs.
The following example displays the ACL table for ACL 1.
(host) #show acl ace-table acl 1
Acl Table
--------
ACL Type ACE Index Ace Count Name Applied
--- ---- --------- --------- ---- -------
1 role 1020 18 logon 0
Total free ACE entries = 3591
Free ACE entries at the bottom = 2991
Next ACE entry to use = 1041 (table 1)
Ace entries reused 373 times
ACL count 64, tunnel acl 0
Related Commands
Configure ACLs using the command ip access-list session.
Command History
This command was available in ArubaOS 3.0.