Concept Guide

show ap arm client-match restriction-table
show ap arm client-match restriction-table
ap-name <name>
ip-addr <ipaddr>
ip6-addr <ip6-addr>
Description
If the client match feature is enabled, the output of this command displays the list of clients that the client
match feature has restricted from the specified AP.
Syntax
Parameter Description
ap-name <name>
Name of the AP for which you want to view the list of restricted clients
ip-addr <ipaddr>
IPv4 address of the AP for which you want to view the list of restricted clients
ip6-addr <ipaddr>
IPv6 address of the AP for which you want to view the list of restricted clients
Usage Guidelines
If the client match feature is enabled, the controller sends APs a list of clients that should not be allowed to
associate to that AP. These lists of restricted clients help the client associate to the best AP, by preventing the
client from associating with a sub-optional AP radio. The output of this command shows a list of all clients that
were ever blacklisted from the specified AP.
Example
(host)#show ap arm client-match restriction-table ap-name <ap-name>
Client Restriction Table for Wifi0
----------------------------------
Client MAC Time last restricted Restricted(Cur/Last)
---------- -------------------- --------------------
24:77:03:32:88:ec Wed Apr 10 03:51:00 2014 0
PS deauth Probe(home/scan/bc_ssid) Auth(home/scan)
--------- ------------------------ ---------------
- 2/0/no 4/0
Time since last restriction(sec) Radio Bssid
-------------------------------- -----------
18603 00:1a:1e:89:c0:d0
Client Restriction Table for Wifi1
----------------------------------
Client MAC Time last restricted Restricted(Cur/Last)
---------- -------------------- --------------------
24:77:03:32:7b:cc Wed Apr 10 03:47:16 2014 0
PS deauth Probe(home/scan/bc_ssid) Auth(home/scan)
--------- ------------------------ ---------------
0/0/no 0/0/no 0/0
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap arm client-match restriction-table | 962