Concept Guide

show ap arm client-match summary
show ap arm client-match summary [client-mac <macaddr>]|[advanced]
Description
If the client match feature is enabled, the output of this command shows the history of AP association changes
triggered by the client match feature.
Syntax
Parameter Description
client-mac <macaddr>
MAC address of a client for which you want to view a history of AP association
changes triggered by the client match feature.
advanced
Display advanced debugging information. Include this parameter only under
the supervision of Dell support.
Example
The following command displays information on the Client Match summary.
(host) #show ap arm client-match summary
SM: Sticky Moves, BM: Bandsteer Moves, LM: Load Balance Moves, VM: VHTsteer Moves, T: Total,
S: Success, R: Reject, TO: Timeout
Client Match Summary
---------------------
MAC SM (T/S) BM (T/S) LM (T/S) VM (T/S) Moves (T/S) Last Move
(Time/Rsn/Dur)) Device Type 11v Moves (T/S/R/TO)
--- -------- -------- -------- -------- ----------- ---------------------
---- ----------- --------------------
84:38:38:20:df:68 0/0 1/1 0/0 0/0 1/1 Aug 13 15:58:51
2014/Bandsteer/X UNKNOWN 1/1/0/0
Total clients:1
Sticky Moves (T/S):0/0
Bandsteer Moves (T/S):1/1
VHTsteer Moves (T/S):0/0
Load Balance Moves (T/S):0/0
Moves using 11v BTM (T/S):1/1
The output of this command includes the following parameters:
Parameter Description
MAC
MAC address of the client that was moved to a different AP radio.
Sticky Moves(T/S)
The output of this column shows the following two values:
l T: Total number of times the client match feature attempted to move a
mobile roaming client because it was staying associated (sticking) to a sub-
optimal AP.
l S: Number of times the client match successfully moved a mobile roaming
client because it was staying associated (sticking) to a sub-optimal AP.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap arm client-match summary | 965