Concept Guide

980| show ap arm scan-times Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Aggressive 11 3+ 0 180855370 180855960 (163)
181658:0:100:100
Group Scan Time
-----------------
channels assign-time(ms) scans-attempted scans-rejected scans-deferred group-width
timer-tick
-------- --------------- --------------- -------------- -------------- -----------
----------
34 113960 1036 0 0 20MHz
183544
36,40,44,48 3184390 28949 0 0 80MHz
183711
38 114070 1037 0 0 20MHz
183575
42 114070 1037 0 0 20MHz
183591
The output of this command includes the following parameters:
Parameter Description
channel
Displays the channels in the group.
assign-time (ms)
The cumulative time spent on the channel.
scans-attempted
The number of times an AP attempted to scan a channel.
scans-rejected
The number of times an AP attempted to scan a channel, but was unable to
scan because the scan was halted by the power save, VoIP aware, or load
aware ARM features.
scans-deferred
The number of times an AP deferred to scan a channel due to an event such
as a radar detection.
dos-scans
The number of times an AP visited the channel to contain a rogue device.
flags
Displays additional information about the channel. The flags key is displayed
at the bottom of the Channel Scan Time table.
group_width
The channel width of the group.
timer-tick
The timer-tick of the last scan.