Concept Guide

show ap arm state
show ap arm state [ap-name <ap-name>|dot11a|dot11g|ip-addr <ip-addr>]
Description
Display Adaptive Radio Management (ARM) information for an individual AP’s neighbors, or show all available
data for any neighboring AP using an 802.11a or 802.11g radio type.
Syntax
Parameter Description
ap-name <ap-name>
Show aggregate ARM Neighbor Information for a specific AP.
dot11a
Show aggregate ARM Neighbor Information for all APs using an 802.11a radio.
dot11g
Show aggregate ARM Neighbor Information for all APs using an 802.11g radio.
ip-addr <ip-addr>
Show aggregate ARM Neighbor Information for a AP with a specific IP address
by entering its IP address in dotted-decimal format.
Usage Guidelines
The output of the show ap arm state command shows 802.11a and 802.11g information for all APs. Include
an AP name or IP address to show data for just a single AP, or use the dot11a or dot11g keywords to show
data for all APs using that radio type.
Examples
The output of this command shows 802.11a information for all neighboring APs.
(host)# show ap arm state
show ap arm state ap-name AP49
AP-1249:10.100.139.233:52:21:26-Edge:disable : Client Density:13
Neighbor Data
-------------
Name IP Address SNR Assignment Neighbor Density
---- ---------- --- ---------- ----------------
AP42 10.100.139.249 41 52/21 13/17/100/76
AP09 10.100.139.224 22 56/21 3/5/23/60
AP48 10.100.139.241 36 60/21 9/11/69/81
The output of this command includes the following information:
Column Description
Name
Name of an AP.
IP address
IP address of an AP.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap arm state | 984