Concept Guide

show ap arm status
show ap arm status {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-addr>}
Description
Issue this command under the supervision of Dell support to display detailed debugging Adaptive Radio
Management (ARM) information and ARMstatus counters for an individual AP.
Syntax
Parameter Description
ap-name <ap-name>
Show ARM status for an AP with a specific name.
bssid <bssid>
Show ARM status for a specific Basic Service Set Identifier (BSSID) on an AP.
An AP’s BSSID is usually the AP’s MAC address.
ip-addr <ip-addr>
Show ARM status for an AP with a specific IP address. Enter the IP address in
dotted-decimal format.
Usage Guidelines
The output of the show ap arm status command shows internal ARM status counters that can be used by
Dell support for debugging purposes.
Command History
Version Description
ArubaOS 6.3 Command introduced.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap arm status | 986