Concept Guide
In the Instant UI
To configure a TFTP server:
1. In the Instant main window, click the System link.
2. Click Show advanced options to display the advanced options.
3. Click the Monitoring tab.
4. Enter the IP address of the TFTP server in the TFTP Dump Server text box.
5. Click OK.
In the CLI
To configure a TFTP server:
(Instant AP)(config)# tftp-dump-server <IP-address>
(Instant AP)(config)# end
(Instant AP)# commit apply
Running Debug Commands
To run the debugging commands from the UI:
1. Navigate to More > Support on the Instant main window.
2. Select the required option from the Command drop-down list.
3. Select All Access Points or Instant Access Point(VC) from the Target drop-down list.
4. Click Run. When you run debug commands and click Save, the output of all the selected commands is
displayed in a single page.
The Support window allows you to run commands for each access point and VC in a cluster. For a complete list
of commands supported in a particular release train, execute the show support-commands command at the
W-IAP CLI. The output of this command displays the list of support commands that you can run through the UI
and the corresponding CLI commands. For more information on these commands, refer to the respective
command page in the Dell Networking W-Series Instant 6.5.0.0-4.3.0.0 CLIReference Guide.
(Instant AP) # show support-commands
Support Commands
----------------
Description Command Name
----------- ------------
AP Tech Support Dump show tech-support
AP Tech Support Dump Supplemental show tech-support supplemental
AP Provisioning Status show activate status
AP 3G/4G Status show cellular status
AP 802.1X Statistics show ap debug dot1x-statistics
AP Access Rule Table show access-rule-all
AP Inbound Firewall Rules show inbound-firewall-rules
AP Active show aps
AP AirGroup Cache show airgroup cache entries
AP AirGroup CPPM Entries show airgroup cppm entries
AP AirGroup CPPM Servers show airgroup cppm server
AP AirGroup Debug Statistics show airgroup debug statistics
AP AirGroup Servers show airgroup servers verbose
AP AirGroup User show airgroup users verbose
AP ALE Configuration show ale config
AP ALE Status show ale status
AP Allowed Channels show ap allowed-channels
AP Allowed MAX-EIRP show ap allowed-max-EIRP
AP All Supported Timezones show clock timezone all
AP ARM Bandwidth Management show ap arm bandwidth-management
Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide Monitoring Devices and Logs | 367