Concept Guide

Configuration Steps CLI Commands UI Procedure
(Instant AP)(Access Rule "wireless-ssid")# rule any
any match any any any permit
NOTE: Ensure that you execute the commit apply command in the Instant CLI before saving the configuration and
propagating changes across the W-IAP cluster.
Table 84: W-IAP Configuration for Scenario 1—IPsec: Single Datacenter Deployment with No Redundancy
W-IAP-Connected Switch Configuration
Client VLANs defined in this example must be opened on the upstream switches in multiple W-IAP
deployments, as client traffic from the slave to the master is tagged with the client VLAN.
Datacenter Configuration
For information on controller configuration, see Configuring a Controller for IAP-VPN Operations on page 243.
Ensure that the upstream router is configured with a static route pointing to the controller for the L3 VLAN.
Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide IAP-VPN Deployment Scenarios | 398