Users Guide

show ap bw-report
show ap bw-report {ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>}
Description
Show the bandwidth reporting table for a specific AP.
Syntax
Parameter Description
ap-name <ap-name>
Show bandwidth data for an AP with a specific name.
bssid <bssid>
Show bandwidth data for a specific Basic Service Set Identifier (BSSID) on an
AP. The Basic Service Set Identifier (BSSID) is usually the AP’s MAC address.
ip-addr<ip-addr>
Show bandwidth data for an AP with a specific IP address by entering an IP
address in dotted-decimal format.
Examples
The output of the following command shows the Dell AP bandwidth table for an AP with the IP address
192.0.2.170.
show ap bw-report ip-addr 192.0.2.170
Bandwidth report for AP "AL16" radio 0
--------------------------------------
Virtual AP Allocated Share Actual Share Offered Load Delivered Load
---------- --------------- ------------ ------------ --------------
corp1344-guest 0% 0% 0 kbps 0 kbps
corp1344-ethersphere-wpa2 0% 0% 0 kbps 0 kbps
Average Throughput:0 kbps
Bandwidth report for AP "AL16" radio 1
--------------------------------------
Virtual AP Allocated Share Actual Share Offered Load Delivered Load
---------- --------------- ------------ ------------ --------------
corp1344-guest 0% 0% 0 kbps 0 kbps
corp1344-ethersphere-voip 0% 0% 0 kbps 0 kbps
corp1344-ethersphere-vocera 0% 0% 0 kbps 0 kbps
Average Throughput:0 kbps
The output of this command includes the following information for all radios on the AP:
Dell Networking W-Series ArubaOS 6.4.x | User Guide show ap bw-report | 1018