Users Guide

Parameter Description
Tx Powersave Queue Timeouts
Number of transmit frames discarded from the power save
queue because the frames aged out
Tx Dropped After Retry
Number of frames dropped after an attempted retry.
Tx Dropped No Buffer
Number of frames dropped because the AP’s buffer was full.
Tx Missed ACKs
Number of retries triggered because an acknowledgment was not
received.
Tx Failed Beacons
Number of times a radio failed to transmit a beacon at the
scheduled interval (100ms).
Tx Multi-Beacon Fail
Number of times multiple consecutive beacons failed to transmit.
Tx Long Preamble
Number of frames sent with a long preamble.
Tx Short Preamble
Number of frames sent with a short preamble.
Tx Beacon Interrupts
Number of broadcast beacons that were interrupted.
TX Interrupts
Number of transmission interrupts.
Tx FIFO Underrun
The number of transmitted FIFO overruns.
Tx Allocated Desc
Number of allocated transmit descriptors.
Tx Freed Desc
Number of freed transmit descriptors.
Tx EAPOL Frames
Number of EAPOL frames transmitted
TX STBC Frames
Number of transmitted frames with Space-time block coding
(STBC) enabled.
TX LDPC Frames
Number of transmitted frames with Low Density Parity Check
(LDPC) enabled.
Tx AGGR Good
Number of aggregated frames successfully transmitted.
Tx AGGR Unaggr
Number of non-aggregate frames transmitted due to
unavailability of additional frames for aggregation at the time of
transmission.
Tx data <number> Mbps
Number of frames transmitted at the specified rate (in Mbps).
Tx <number> Mbps [Long]
Number of frames with a long preamble transmitted at the
specified rate.
Dell Networking W-Series ArubaOS 6.4.x | User Guide show ap debug radio-stats | 1124