Users Guide

Parameter Description
DSCP mapping for WMM background AC
Displays the DSCP value used to map WMM background
traffic.
Hide SSID
Shows if the feature to hide a SSID name in beacon frames
is enabled or disabled.
Deny_Broadcast Probes
When a client sends a broadcast probe request frame to
search for all available SSIDs, this option controls whether
or not the system responds for this SSID. When enabled, no
response is sent and clients have to know the SSID in order
to associate to the SSID. When disabled, a probe response
frame is sent for this SSID.
Local Probe Response
Shows if local probe response is enabled or disabled on the
AP. If this option is enabled, the AP is responsible for
sending 802.11 probe responses to wireless clients’ probe
requests. If this option is disabled, then the controller sends
the 802.11 probe responses
Disable Probe Retry
Shows if the AP has enabled or disabled MAC-level retries
for probe response frames. By default this parameter is
enabled, which mean that MAC level retries for probe
response frames is disabled.
Maximum Transmit Failures
Display the maximum number of transmission failures
allowed before the client gives up.
BC/MC Rate Optimization
Shows if the AP has enabled or disabled scanning of all
active stations currently associated to that AP to select the
lowest transmission rate for broadcast and multicast
frames. This option only applies to broadcast and multicast
data frames; 802.11 management frames are transmitted
at the lowest configured rate.
High throughput enable (SSID)
Shows if the AP has enabled or disabled the use of its high-
throughput SSID in 40 MHz mode.
40 MHz channel usage
Determines if this high-throughput SSID allows high-
throughput (802.11n) stations to associate.
MPDU Aggregation
Shows if the AP has enabled or disabled MAC protocol data
unit (MDPU) aggregation.
Max transmitted A-MPDU size
Shows the maximum size, in bytes, of an A-MPDU that can
be sent on the AP’s high-throughput SSID.
Max received A-MPDU size
Shows the maximum size, in bytes, of an Aggregated-MAC
Packet Data Unit (A-MPDU) that can be received on the AP’s
high-throughput SSID.
Dell Networking W-Series ArubaOS 6.4.x | User Guide show ap debug received-config | 1136