Users Guide

1395 | show control-plane-security Dell Networking W-Series ArubaOS 6.4.x| User Guide
show control-plane-security
show control-plane-security
Description
Show the current configuration of the control plane security profile.
Syntax
No parameters.
Usage Guidelines
The control plane security profile enables and disables the control plane security feature and identifies campus
APs to receive security certificates. Issue this command to view current control plane security settings.
Example
The following command shows the control plane security and auto certificate provisioning features are enabled
in the control plane security profile, and that the controller will send certificates to a range of IP addresses:
(host)(config) #show control-plane-security
Control Plane Security Profile
------------------------------
Parameter Value
--------- -----
Control Plane Security Enabled
Auto Cert Provisioning Enabled
Auto Cert Allow All Disabled
Auto Cert Allowed Addresses 10.1.1.16 - 10.1.42.55
Related Commands
Command Description Mode
control-plane-security
Configure the control plane security profile by
identifying APs to receive security certificates.
Config mode
Command History
This command was introduced in ArubaOS 5.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system. Enable mode on master or local
controllers