Users Guide

1859 | show rf optimization-profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
show rf optimization-profile
show rf optimization-profile [<profile>]
Description
Show an Optimization profile.
Syntax
Parameter Description
<profile>
name of an ARM profile
Usage Guidelines
Issue this command without the <profile>parameter to display the entire Optimization profile list, including
profile status and the number of references to each profile. Include a profile name to display detailed
configuration information for that profile.
Examples
The example below shows that the controller has two configured Optimization profiles. The References
column lists the number of other profiles with references to the Optimization profile, and the Profile Status
column indicates whether the profile is predefined. User-defined profiles will not have an entry in the Profile
Status column.
(host) # show rf optimization-profile
RF Optimization Profile List
----------------------------
Name References Profile Status
---- ---------- --------------
default 6
profile2 1
Total:2
This example displays the configuration settings for the profile profile2.
(host) #show rf optimization-profile profile2
RF Optimization Profile "profile2"
---------------------------------
Parameter Value
--------- -----
Station Handoff Assist Disabled
Detect Association Failure Disabled
Coverage Hole Detection Disabled
Hole Good RSSI Threshold 20
Hole Good Station Ageout 30 sec
Hole Detection Interval 180 sec
Hole Idle Station Ageout 90 sec
Hole Poor RSSI Threshold 10
Detect interference Disabled
Interference Threshold 90 %
Interference Threshold Exceed Time 25 sec
Interference Baseline Time 25 sec
RSSI Falloff Wait Time 4
Low RSSI Threshold 10