Users Guide

1877 | show rrm dot11k neighbor-report Dell Networking W-Series ArubaOS 6.4.x| User Guide
show rrm dot11k neighbor-report
show rrm dot11k neighbor-report [ap-name |
bssid <bssid-of-an-ap> | ip-addr <ip-address-of-an-ap>]
Description
Displays the neighbor information for a particular AP. If the AP name or the AP’s IP address is specified, the
user should specify the ESSID to get the neighbor information. If the ESSID is not specified, the command will
display the neighbor information for all the Virtual AP's configured on the AP.
Syntax
Parameter Description
ap-name
Identify the AP for which you want to view information.
<name-of-an-ap>
Name of an AP.
<essid>
ESSID of the AP. If the ESSID includes spaces, you must enclose it in
quotation marks.
bssid
Enter the BSSID address of the AP.
ip-addr
Enter the IP address of the AP.
Example
The output of this command shows the neighbor information for r-wing-94.
(host) # show rrm dot11k neighbor-report ap-name r-wing-94
802.11K Neighbor Report Details
-------------------------------
Flags: S: Spectrum Management, Q: QoS, A: APSD, R: Radio Measurement
ESSID BSSID Channel Reachability Security Authenticator Preference
Flags
----- ----- ------- ------------ -------- ------------- ---------- -
----
r-wing-voice 00:0b:86:6d:3e:30 165 Reachable Same Same 1
SR
r-wing-voice 00:0b:86:6d:3e:20 1 Reachable Same Same 1
SR
r-wing-data 00:0b:86:6d:3e:40 6 Reachable Same Same 1
SR
r-wing-data 00:0b:86:6d:4e:41 153 Reachable Same Same 1
SR
Num Entries:4
Command History
This command was available in ArubaOS 3.4