Users Guide

2051 | show wlan bcn-rpt-req-profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
show wlan bcn-rpt-req-profile
show wlan bcn-rpt-req-profile <profile-name>
Description
Shows configuration and other information about the parameters for the Beacon Report Request frames.
Syntax
Parameter Description
<profile>
Name of a WLAN beacon report request profile.
Usage Guidelines
Issue this command without the <profile> parameter to display the entire Beacon Report Request profile list,
including profile status and the number of references to each profile. Include a profile name to display detailed
configuration information for that profile.
For this profile to take effect, the 802.11K feature needs to be enabled.
Examples
(host) #show wlan bcn-rpt-req-profile
Beacon Report Request Profile List
----------------------------------
Name References Profile Status
---- ---------- --------------
default 1
test 0
Total:2
(host) #
(host) #show wlan bcn-rpt-req-profile default
Beacon Report Request Profile "default"
---------------------------------------
Parameter Value
--------- -----
Interface 1
Regulatory Class 12
Channel 9
Randomization Interval 100
Measurement Duration 100
Measurement Mode for Beacon Reports active-all-ch
Reporting Condition 2
ESSID Name aruba-ap
Reporting Detail Disabled
Measurement Duration Mandatory Disabled
Request Information values 0/21/22
The output of this command includes the following parameters: