Users Guide

2105 | show wlan traffic-management-profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description
Report interval
Number of minutes between bandwidth usage reports.
Station Shaping Policy
Shows which of three possible Station Shaping policies is configured on
the profile.
l default-access: Traffic shaping is disabled, and client performance
is dependent on MAC contention resolution. This is the default traffic
shaping setting.
l fair-access: Each client gets the same airtime, regardless of client
capability and capacity. This option is useful in environments like a
training facility or exam hall, where a mix of 802.11a/g, 802.11g and
802.11n clients need equal to network resources, regardless of their
capabilities. The bw-alloc parameter of a traffic management
profile allows you to set a minimum bandwidth to be allocated to a
virtual AP profile when there is congestion on the wireless
network.You must set traffic shaping to fair-access to use this
bandwidth allocation value for an individual virtual AP.
l preferred-access: High-throughput (802.11n) clients do not get
penalized because of slower 802.11a/g or 802.11b transmissions
that take more air time due to lower rates. Similarly, faster
802.11a/g clients get more access than 802.11b clients.
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on master or local controllers.