Users Guide

2203 | voice alg-based-cac Dell Networking W-Series ArubaOS 6.4.x| User Guide

voice alg-based-cac

disable

enable

Description

This command is used to enable or disable VoIP signaling based Call Admission Control (CAC).

Syntax

Parameter Description

disable

Disable VoIP signaling based CAC.

enable

Enable VoIP signaling based CAC.

Usage Guidelines

When call admission control in the VoIP CAC profile is enabled along with voice ALG based CAC, the controller

does call admission control based on VoIP signaling and Traffic Specification (TSpec) messages (if handset

supports TSpec), with precedence given to TSpec messages. When call admission control in the VoIP CAC profile

is enabled while the voice ALG based CAC is disabled, the controller does call admission control based on TSpec

signaling messages. If the handset does not support TSpec, call admission control is not applied.

Example

The following example disables VoIP signaling based CAC:

(host) (config) #voice alg-based-cac disable

Command History

Version Description

ArubaOS 6.2 Command introduced.

Command Information

Platforms Licensing Command Mode

All platforms This command requires the

PEFNG license

Config mode on master controller