Users Guide

2213 | vpdn group l2tp Dell Networking W-Series ArubaOS 6.4.x| User Guide
vpdn group l2tp
vpdn group l2tp
client configuration {dns|wins} <ipaddr1> [<ipaddr2>]
disable|enable
l2tp tunnel hello <seconds>
no ...
ppp authentication {CACHE-SECURID|CHAP|EAP|MSCHAP|MSCHAPv2|PAP}
ppp securid cache <minutes>
Description
This command configures an L2TP/IPsec VPN connection.
Syntax
Parameter Description Range Default
client configuration
Configures parameters for the remote clients. — —
dns
Configures a primary and optional secondary DNS
server.
— —
wins
Configures a primary and optional secondary WINS
server.
— —
disable|enable
Disables or enables termination of L2TP clients. — enabled
l2tp tunnel hello
Configures L2TP tunneling hello timeout, in
seconds.
10-
1440
60 seconds
no
Negates any configured parameter. — —
ppp authentication
Enables the protocols for PPP authentication. This
list should match the L2TP configuration configured
with the vpn-dialer command on the controller.
— —
CACHE-SECURID
The controller caches Secure ID tokens so that the
user does not need to reauthenticate each time a
network connection is lost.
— —
CHAP
Use CHAP with PPP authentication. — —
EAP
Use EAP-TLS with PPP authentication. Specify this
protocol for Windows IPsec VPN clients that use
Common Access Card (CAC) Smart Cards that
contain user information and digital certificates.
— —
MSCHAP
Use MSCHAP with PPP authentication. — —
MSCHAPv2
Use MSCHAPv2 with PPP authentication. This is the
default for L2TP
— —