Users Guide

wlan tsm-req-profile
wlan tsm-req-profile <profle-name>
bin0-range <bin0-range>
clone
dur-mandatory
measure-duration <measure-duration>
no
num-repeats <num-repeats>
random-interval <random-interval>
request-mode {normal | triggered}
traffic-id <traffic-id>
Description
This command configures a TSM Report Request Profile.
Syntax
Parameter Description Range Default
<profile-name>
Name of this instance of the profile.
The name must be 1-63 characters.
— “defaul
t”
bin0-range <bin0-range>
This value is used to set the 'Bin 0
Range' field in the Transmit
Stream/Category Measurement
Request frame. Bin 0 Range
indicates the delay range of the first
bin (Bin 0) of the Transmit Delay
Histogram, expressed in units of
TUs.
0- 255 6
clone <source>
Creates a copy of the Transmit
Stream Measurement Request
Report Request Profile.
<source> is the name of an existing
TSM Profile from which parameter
values are copied.
— —
dur-mandatory
This parameter is used to set the
"Duration Mandatory" bit of the
Measurement Request Mode field of
the Transmit Stream/Category
Measurement Request frame.
—
Enabled
Dell Networking W-Series ArubaOS 6.4.x | User Guide wlan tsm-req-profile | 2338