Users Guide

675 | pan profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
pan profile
pan profile <profile-name>
clone
firewall host <host> port <port> username <username> passwd <password>
no
Description
This command configures a Palo Alto Networks (PAN) profile to allow a controller to communicate with a
PANfirewall.
Syntax
Parameter Description
clone
Name of an existing PAN profile configuration from which parameter values
are copied.
firewall
Configures the information for the associated PAN firewall.
host <host>
IP address or hostname of the PANfirewall.
port <port>
Port number of the PAN firewall.
username <username>
The username of the PAN firewall.
passwd <password>
The password of the PAN firewall.
no
Negates any configured parameter.
Usage Guidelines
This command is used to configure the PANfirewall that the controller will be communicating with. The
username and password must match the name of the admin account configured on the PANfirewall.
(host) (config) #pan profile default
(host) (Palo Alto Networks Servers Profile "default") #firewall host 192.0.2.1 port 5642
username axde passwd ZAQ!2wsx
Command History
Modification
ArubaOS 6.4 Command introduced.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or config mode on master or local
controllers