Users Guide

show ap arm client-match neighbors
show ap arm client-match neighbors
ap-name <name>
ip-addr <ipaddr>
ip6-addr <ipaddr>
Description
If the client match feature is enabled, the output of this command displays the BSSID of other APs seen by
clients in the select AP's RFneighborhood.
Syntax
Parameter Description
ap-name <name>
View neighboring clients for an AP with a specified name
ip-addr <ipaddr>
View neighboring clients for an AP with a specified IP address.
ipv6-addr <ipaddr>
View neighboring clients for an AP with a specified IPv6 address.
Usage Guidelines
Issue this command to view a list of other APs seen by clients currently associated to the selected AP.
Example
The example below indicates that the clients currently associated to the AP can detect signals from three other
APs.
(host)#show ap arm client-match neighbors ap-name <ap-name>
Client View
------------
BSSID Channel
----- -------
d8:c7:c8:37:84:70 132
d8:c7:c8:88:b6:50 132
d8:c7:c8:37:84:10 124
Num Neighbors:3
The output of this command includes the following parameters:
Parameter Description
Client MAC
AP name of the AP from which the client can detect a signal.
Signal
Signal strength, in dBm, of the probe request received from Client
Assoc
A "Y" in this field indicates that the client is currently associated to that AP radio.
Sec since last heard
Time elapsed since the APradio heard from the client.
Sec since last repor-
Time elapsed since the APradio heard from the client.
Dell Networking W-Series ArubaOS 6.4.x | User Guide show ap arm client-match neighbors | 974