Users Guide

989 | show ap arm neighbors Dell Networking W-Series ArubaOS 6.4.x| User Guide
show ap arm neighbors
show ap arm neighbors {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-addr>}
Description
Show the ARM settings for an AP’s neighbors.
Syntax
Parameter Description
ap-name <ap-name>
Show data for an AP with a specific name.
bssid <bssid>
Show data for a specific Basic Service Set Identifier (BSSID). An AP’s BSSID is
usually the AP’s MAC address.
ip-addr <ip-addr>
Show data for an AP with a specific IP address. Enter the IP address in dotted-
decimal format.
Examples
The output of this command shows ARM neighbor information for AP name ap70_1.
(host)# show ap arm neighbors ap-name ap70_1
BSSID: BSSID of discovered radio
ESSID: ESSID of discovered radio/Src BSSID through which the neighbor is discovered
Channel: Channel of operation of discovered radio
SNR: Signal to noise ratio of discovered radio
tx-power: Tx Power of disovered radio (if known)
PL: Path loss to discovered radio (using txpower and SNR)
AP Flags: Active: Discovered using OTA updates
Passive: Discovered using passive scan
Indirect: Two hop neighbors discovered using neighbors OTA update
Last Update: Timestamp when last OTA update was received (total OTA updates)
ARM Neighbors
-------------
BSSID ESSID Channel SNR Tx-power PL (dB) AP Flags Last Update (Total
updates)
----- ----- ------- --- -------- ------- -------- ---------------------
------
6c:f3:7f:b6:68:14 ssid-ap1 153 49 22 69 Passive
18:64:72:93:6a:f2 ssid-ap2 132 48 24 68 Passive
18:64:72:02:24:30 ssid-ap3 153 47 18 63 Passive
18:64:72:01:f8:f0 ssid-ap4 36 60 22 0 Indirect 2015-03-12 16:38:26
9c:1c:12:fe:96:e4 ssid-ap5 11 33 18 123 Indirect 2015-03-13 08:37:18
6c:f3:7f:4b:64:23 ssid-ap6 6 51 20 125 Active 2015-03-12 14:05:48
The output of this command includes the following information: