User Manual

(
Figure.6
Fit the replacement)
7.
Slide the new cable module onto the dock's base until its fully seated
(
Figure.7
Seat the new module)
.
Turn the dock so that the Dell Logo is pointing down again
(
Figure.8
Flip the dock over)
9. Reinstall the two (2) Philips head screws
(
Figure.9
Replace the screws)
10.
Re-connect the cables (and the new A/C adapter if one was included in the kit)
Back to Top
Article Properties
Affected Product
Dell Performance Dock - WD19DC, Dell Thunderbolt Dock - WD19TB