Owner's Manual

Self-Diagnostics allows you to test your software, hardware, and the network. If you are having difficulty, run this program to help
you isolate the problem.
Top of Page
Running Self-Diagnostics
To perform the self-diagnostics:
1. From the Help menu, select Self-Diagnostics. The Self-Diagnostics window appears.
2. Click More... to expand the window and view more options.
3. If you want to test the mobile broadband card without checking the network, select the Skip Network Diagnostics check
box.
4. Click Start to begin the test.
As the test proceeds, the results for each test category are displayed in the Self Test box. If you chose to test the network,
detailed network status information is displayed in the Network box at the bottom of the window. If the signal strength
changes during the test, a dialog box appears asking if you want to retest.
Note: Signal strength may change the outcome of the test if your problem was caused by a weak signal.
5. Click OK to rerun the test.
If a test category passed, "Passed" appears in green text in the Result column. If a test fails, "Fails" appears in red. Details
of each test category—Software, Hardware, and Network—are displayed in the window.
6. To stop the test, click Stop.
7. When you have finished testing, close the window.