Service Manual
Table Of Contents
- Vostro 5625 Service Manual
- Contents
- Working inside your computer
- Removing and installing components
- Drivers and downloads
- BIOS setup
- Troubleshooting
- Handling swollen Lithium-ion batteries
- Dell SupportAssist Pre-boot System Performance Check diagnostics
- Built-in self-test (BIST)
- System-diagnostic lights
- Real-Time Clock (RTC Reset)
- Recovering the operating system
- Backup media and recovery options
- WiFi power cycle
- Drain residual flea power (perform hard reset)
- Getting help and contacting Dell
NOTE: This is the heatsink for your computer that supports the discrete Graphics Processing Unit (GPU).
NOTE: This is the heatsink for your computer that supports integrated Graphics Processing Unit (GPU).
Steps
1. In reverse sequential order (7>6>5>4>3>2>1), or (4>3>2>1), whichever is applicable, loosen the seven or four captive
screws, whichever is applicable, that secure the heat sink to the system board.
2. Lift the heat sink from the system board.
Removing and installing components
35