Service Manual

Table 5. System setup options—Advance menu (continued)
Advance
Power Option
Power on LID open Controls the Power function on LID open action.
Options are:
● Enabled (Default)
● Disabled
Maintenance Maintenance information.
Data Wipe on next boot Performs Data wipe on next boot. Options are:
● Disabled (Default)
● Enabled
BIOS Recovery from Hard Drive Performs reset of firmware to the factory image saved on the secondary
storage. Options are:
● Enabled (Default)
● Disabled
BIOS Auto Recovery Performs auto firmware reset when corrupted BIOS is detected. Options are:
● Disabled (Default)
● Enabled
SupportAssist System Resolution Onboard Diagnostics
Auto OS Recovery Threshold Performs SupportAssist OS recovery after the set value failed boot attempts.
Options are:
● Off
● 1
● 2 (Default)
● 3
Support Assist OS Recovery Enabled Support Assist OS recovery on failed boot attempts. Options are:
● Disabled
● Enabled (Default)
Keyboard Illumination Allows to Switch-on/switch-off the Keyboard backlight.
Options are:
● Disable
● Dim
● Bright (Default)
Keyboard Backlight with AC Allows to permanently turn off/turn-on the Keyboard backlight without the AC
adapter.
Options are from 5 Seconds to 15 Minutes. Default option is set to1 Minute.
Keyboard Backlight with Battery Allows to permanently turn off/turn-on the Keyboard backlight without the AC
adapter.
Options are from 5 Seconds to 15 Minutes. Default option is set to1 Minute.
External USB Ports Allows to turn off the External USB ports in the Operating System.
Options are:
● Enabled (Default)
● Disabled
Microphone Allows to Switch-on/switch-off the microphone.
Options are:
● Enabled (Default)
● Disabled
62 BIOS setup