User Guide

Use sensors

Smart sensors respond when you put on or take off your headphones.

Table 8. Sensors: Basics

With active sensors putting on the headset will: taking off the headset will:

Call Answer the call Mute the headset

Music/media Resume music/media (if playing previous

to taking off)*

Pause music/media (if playing)*

Mute Unmute if on an active call Mute if on an active call

NOTE: *Functionality varies by application. Does not function with web-based apps.

Reset sensors

You may need to reset the sensors if they are not working as expected.

Steps

There are two ways to reset the headset sensors. Choose:

● With your headset powered on, charge your headset on the charge stand for 10 seconds

● Press and hold both the Mute and Play/pause buttons for more than 4 seconds until the LEDs flash purple twice,

being careful to not touch the earcup padding or allow it to come in contact with surfaces

Disable sensors

Steps

You can disable your headset smart sensors several ways:

● Manage sensors through Plantronics Hub software

● Hold both the Mute

and Call buttons for more than 4 seconds until the LED flashes purple then red. Repeat to

reactivate; the LED flashes purple then blue

NOTE: Sensors cannot be disabled while streaming audio.

ANC

Active Noise Canceling (ANC) reduces external noise and enhances your music and sound quality.

Steps

Your headset ships with ANC on. To turn ANC off, slide the switch away from "ANC."

Interact with Microsoft softphone

Steps

● For Microsoft Teams, tap the headset's Call

button to interact (application required).

● For Skype for Business, press and hold the headset's Call

button for 2 seconds to interact (application required).

● Set your target phone by going to Plantronics Hub for Windows/Mac > Softphones > Software Settings > Target

Softphone

Make/Take/End Calls