Technical Guide
Table Of Contents
- Dell EMC PowerEdge R450 Technical Guide
- Contents
- System overview
- System features and generational comparison
- Chassis views and features
- Processor
- Memory subsystem
- Storage
- Networking
- Expansion cards and expansion card risers
- Power, thermal, and acoustics
- Rack, rails, and cable management
- Supported Operating Systems
- Dell EMC OpenManage systems management
- Dell Technologies Services
- Dell EMC ProDeploy Enterprise Suite
- Dell EMC Data Migration Service
- Dell EMC ProSupport Enterprise Suite
- Dell EMC ProSupport Plus for Enterprise
- Dell EMC ProSupport for Enterprise
- Dell EMC ProSupport One for Data Center
- ProSupport for HPC
- Support Technologies
- Services for Data Security
- Dell Technologies Education Services
- Dell Technologies Consulting Services
- Dell EMC Managed Services
- Appendix A. Additional specifications
- Appendix B. Standards compliance
- Appendix C Additional resources
Table 12. Expansion card riser configurations (continued)
Configurations Expansion card
risers
PCIe Slots Controlling
processor
Height Length Slot width
Config2. with 0x
LP
NA NA NA NA NA NA
Figure 8. Riser 1
Figure 9. Riser 2c
NOTE: The expansion-card slots are not hot-swappable.
The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The expansion
cards with the highest priority should be installed first using the slot priority indicated. All the other expansion cards should be
installed in the card priority and slot priority order.
Table 13. Configuration 0: R1
Card type Slot priority Maximum number of cards
Dell Serial port module (LP) 1 1
Expansion cards and expansion card risers 21