Technical Guide

Table 20. Chassis dimensions (continued)
Drives Xa Xb Y Za Zb Zc
(18.976
inches)
5
inches)
35.84 mm (1.41 inches) with
bezel
691.07mm (27.207 inches)
(Ear to butterfly L bracket
housing)
(Ear to PSU
handle without
velcro strap)
8 x 2.5-inch 482
mm
(18.976
inches)
434 mm
(17.08
inches)
42.8
mm(1.68
5
inches)
22 mm (0.866 inches)
without bezel
35.84 mm (1.41 inches) with
bezel
627.03 mm (24.686 inches)
(Ear to PSU surface)
640.3 mm (25.209 inches)
(Ear to butterfly L bracket
housing)
662.19 mm
(26.070 inches)
(Ear to PSU
handle without
velcro strap)
NOTE: Zb is the nominal rear wall external surface where the system board I/O connectors reside.
Chassis weight
Table 21. Chassis maximum weight
System configuration Maximum weight (with all drives/SSDs/rails/bezel)
4 x 3.5-inch system 18.62 kg (41.05 pound)
8 x 2.5-inch system 16.58 kg (36.55 pound)
Video specifications
The platform supports Integrated Matrox G200 graphics controller with 16 MB of video frame buffer:
Table 22. Video Resolution and Refresh Rate
Resolution Refresh rate (Hz) Color depth (bits)
1024 x 768 60 8, 16, 32
1280 x 800 60 8, 16, 32
1280 x 1024 60 8, 16, 32
1360 x 768 60 8, 16, 32
1440 x 900 60 8, 16, 32
1600 x 900 60 8, 16, 32
1600 x 1200 60 8, 16, 32
1680 x 1050 60 8, 16, 32
1920 x 1080 60 8, 16, 32
1920 x 1200 60 8, 16, 32
*DVO - DP is for investigation only, dependent on Nuvoton DVO capabilities to support up to 165 MHz.Rear Panel Performance
is TBD subject to final board design and losses to rear VGA connector
*(RB) - Reduced Blanking for Digital Displays requiring less blank time. This was introduced for Signal Integrity improvements by
reducing Pixel Clock rates for VGA- Analog input devices.
42
Appendix A. Additional specifications